Adding Monitoring

Audio Monitoring

［When [Audio Monitoring Mode] is set, clips on the Recorder can be played back with the different setting from that of the audio output set in the channel map of [Sequence settings] or [Project Settings]. In [Audio Monitoring Mode], audio output of the clip played back on the Player can also be set.

Note

When a sequence clip is exported to a file, export is performed according to the settings of [Channel map] in [Sequence settings], regardless of the modes in [Audio Monitoring Mode].
If you select a channel to be output using the output hardware product while [Audio Monitoring Mode] is set, the channel will conform to the output channel set in [Audio Monitoring Mode].
Audio source of the clip to be played back on the Player is played back in the channel mode set in the track patch.

1 Click [Change to Player]/[Change to Recorder] to switch to the display window to be set.

2 Click [View] on the menu bar, and click [Audio Monitoring Mode] → the mode to be set.

[Off]	Output the original channel of the source on the Player. Output audio according to the settings in [Channel map] of [Sequence settings] on the Recorder. Sequence Settings
[Monaural]	Output audio in monaural. Downmix to L (Ch1) and R (Ch2) to be the same audio.
[Stereo]	Output audio in stereo. Divide the audio to L (Ch1) and R (Ch2) and downmix by decreasing 3 dB.
[Custom]	Play back audio in the mode set in [Custom setting].
[Custom setting]	Customize [Audio Monitoring Mode]. The customized settings can be saved and loaded as presets.

Alternative

Set this function in [Audio Monitoring Mode] in the [Audio Mixer] dialog box.

[Audio Mixer] Dialog Box

Default value can be changed with the [Audio Monitoring Mode] setting in [System Settings]. Changed default value is applied when the project starts.

[Audio Monitoring Mode]