[Loudness Meter] in [System Settings]

You can register the reference to be used at the loudness measurement as a preset.

1) Click [Settings] on the menu bar, and click [System Settings].

2) Click the [Application] tree, and click [Loudness Meter].

3) Select a loudness meter in the preset list and set each item.

4) Click [Register].

5) Click [OK].

[Loudness Meter] Screen

(1)

Preset list

A list of presets is displayed.

A “*” mark will be displayed in front of the name of the preset that is set as default, which will be used as the reference for loudness measurement and normalization.

(2)

[Add]

Add a preset.

(3)

[Delete]

Delete a preset.

(4)

[Register]

Register the preset as configured.

(5)

[Import]/[Export]

Import/export the setting file for the loudness meter.

(6)

[Preset Name]

Enter the name of the preset.

(7)

[Momentary Gating Block Size]

Enter the measurement time for the momentary value.

(8)

[Short-term Gating Block Size]

Enter the measurement time for the short-term value.

(9)

[Overlap]

Enter the overlap value.

(10)

[Meter range]

Set the meter range.

(11)

[Group 1]/[Group 2]

Set the output channel assignments for L/R/C/LS/RS channels.

Both [Group 1] and [Group 2] can be set so that measurement is performed on two lines simultaneously.

[Downmix]

Select the downmix calculation formula from the list.

(12)

[Save as default] *1

Select a preset in the preset list and click [Save as default] to set the selected preset as default.

(13)

[Relative Gating threshold]

Enter the relative gating block level.

(14)

[Target Level]

Enter the target level.

(15)

[Tolerance] *1

Set the value for the allowable tolerance.

*1 Setting items added on Version 8.51.

 To Top 
EDIUS World Home Where to Buy Try EDIUS 8 Support Manual FAQ
Copyright © 2017 Grass Valley Canada. All rights reserved.
Join the Conversation: Grass Valley on Facebook Grass Valley on Twitter Grass Valley on Youtube