Configuring Imaging Communicator Services
1. Open iControl Solo, and double-click ImagingCommunicator in the logical view.
[ Graphic ]
2. In ImagingCommunicator, click Standby.
[ Graphic ]
3. In the COM Port list select the COM port you chose when you installed the IC-USB device
NOTE: COM port can only be selected in Standby mode. |
4. Click Online to activate the selected port.
The Imaging Communicator service will be restarted and iControl Solo will query all Imaging Series frames interfaced to your computer. Any devices (e.g. cards) housed in the frames will be displayed in iControl Solo.
