Specifying a Location for Saving Loudness Data
IMPORTANT: Make sure you have sufficient storage space for loudness data |
Ensure you have enough storage space available for loudness data at the specified location. If, when logging loudness data, the logger runs out of space, it will stop logging. Grass Valley recommends using a controlled remote storage device to ensure adequate storage space. |
REQUIREMENTS: |
Make sure you meet the following conditions before beginning this procedure: |
• The PC running iControl Solo is connected to a device which is streaming loudness values, such as a Kaleido-Solo. |
• You have opened iControl Solo ( click HERE). |
1. In Loudness Logger, select the loudness source.
2. Click Settings.
[ Graphic ]
3. In the Loudness Logger Settings window, click the elipsis button to browse for the location in your local file system where you would like to save loudness data.
[ Graphic ]
4. Click Apply.
If you chose a valid path, the Success message appears.
[ Graphic ]
