Acknowledging an Individual Alarm


REQUIREMENT:
Before beginning this procedure, make sure you have opened iC Navigator (click HERE).

1. If you would like to acknowledge an alarm with the GSM Alarm Browser, perform the following steps:

a) Open the GSM Alarm Browser for the appropriate GSM (click HERE).

b) Right-click the alarm and click Acknowledge.

[ Graphic ]

2. If you would like to acknowledge an alarm from a channel’s Web page, perform the following steps:

a) Open the iC Web page (click HERE).

b) In the channel’s Web page, right-click the alarm, and then click Acknowledge.


NOTE: Once the affected individual channel is acknowledged the button changes from flashing red to solid red.