Alarms in iControl > Detailed Directions > Working with Operational Modes > Checking the Operational Mode of an Alarm
 
Checking the Operational Mode of an Alarm
 

REQUIREMENTS:  

Make sure you meet the following conditions before beginning this procedure: 
• If you are working in iC Web, make sure you have opened the appropriate iControl Web page (click HERE).
• If you are working in iC Navigator, make sure you have opened iC Navigator (click HERE).
• Right-click the status icon of the alarm, point to Operational mode, and verify which of the operational modes are active, if any.

[ Graphic ]  

 

NOTE: The same shortcut menu is available in both iC Web and iC Navigator, to make it easy for operators to manually enable, disable, or check the operational mode for selected alarms.

 

NOTE: The system can be configured to always report a normal status instead of the real status for suppressed alarms. In such a case, the overall channel status icon would be green instead of showing the real status. The default behavior is to show the real alarm status. Should you need your system configured in such a way, please contact the Grass Valley technical support team (see "Contact Us", on page 627).