Common Tasks > iC Router Control Common Tasks > Starting iC Router Control
 

Starting iC Router Control

 
REQUIREMENT:  
Before beginning this procedure, make sure you have started iControl Launch Pad (click HERE).
1. On iControl Launch Pad, either type in the IP address of your Application Server or select from the list of available IP addresses.

[ Graphic ]  

2. Click the iC Router Control icon.

[ Graphic ]  

System Response: The iC Router Control Connection window appears.

[ Graphic ]  

3. Perform the following tasks in the iC Router Control Connection window, as required:

[ Table ] 

 
 
To do this...
...do this...
Connect to a different Router Manager’s IP address (other than the one currently displayed)
1. Click within the Connected to box.
2. Delete the existing IP address.
3. Type the new Router Manager’s IP address.
4. Click Connect.

[ Graphic ] 

Open Router Manager Configurator
• Click Router Manager.
Start router control software.
1. Select the desired item under Matrix view.
2. Click Open.
4. In Router Manager Configurator, select a router component on the left to view related information and options on the right.
For example, click Physical Routersto view a list of routers currently defined in iControl.

[ Graphic ]  

Click the folder corresponding to a specific router to view its configuration details.

[ Graphic ]  

Click on a level to view its configuration details.

[ Graphic ]