Acknowledging an Individual Alarm
REQUIREMENT: |
Before beginning this procedure, make sure you have opened iC Navigator ( click HERE). |
1. If you would like to acknowledge an alarm with the GSM Alarm Browser, perform the following steps:
a) Open the GSM Alarm Browser for the appropriate GSM (
click HERE).
b) Right-click the alarm and click Acknowledge.
[ Graphic ]
2. If you would like to acknowledge an alarm from a channel’s Web page, perform the following steps:
b) In the channel’s Web page, right-click the alarm, and then click Acknowledge.
NOTE: Once the affected individual channel is acknowledged the button changes from flashing red to solid red. |