Enabling iControl to run a Custom SNMP Driver
NOTE: The SNMP agent on the device must be enabled. Please consult the documentation that came with the device for instructions. |
REQUIREMENTS: |
Make sure you meet the following conditions before beginning this procedure: |
• There is an active connection between the iControl Application Server and the SNMP device. |
|
1. In iC Navigator, double-click on a GSM to open its Alarm Browser window.
2. In the Create new alarm provider list, select SNMP - Generic manager, and then click New.
[ Graphic ]
System Response: The SNMP Manager window appears.
[ Graphic ]
3. Click Import MIB.
[ Graphic ]
System Response: The Open window appears.
4. Find and select a MIB file, and then click Open.
System Response: The elements of the loaded MIB appear in the SNMP Manager window.
[ Graphic ]
5. Type or paste the script for your custom SNMP driver in the text editing area.
[ Graphic ]
6. When you are done, click OK.
System Response: The GSM will run your custom SNMP driver and begin publishing its specified alarms.