This page provides links to documentation for the K2 Summit Production Client, K2 Solo Media Server, K2 appliances, the K2 Dyno Replay Controller, the K2 Storage Area Network, and K2 FCP Connect.
- K2 AppCenter User Manual
Provides instructions for operating the K2 AppCenter application and configuring channels on the K2 product.
- K2 System Guide
This guide provides all the information you need to go beyond factory default settings and customize your system�s configuration to meet your site-specific needs.
- K2 Summit Production Client Service Manual
Contains information for solving common setup problems, as well as information on servicing and maintenance.
- K2 Storage Area Network Installation and Service Manual
Contains installation and configuration procedures for shared storage options. Also includes administrative and maintenance procedures.
- Aurora Mirrored System Manager Installation and Configuraton Guide
Contains installation, configuration, and operation procedures for the Aurora Mirrored System Manager.
- K2 Lx0 RAID Instruction Manual
Contains procedures for physical installation, troubleshooting, and servicing the K2 RAID Storage device for Levels 10, 20, 30, and 40 K2 Storage Systems.
- K2 Summmit Production Client Quick Start Guide
Contains the essential steps for installing the K2 Summit Production Client.
- K2 Storage Cabling Guide
Contains diagrams and instructions for connecting cables to install K2 storage, inlcluding all levels of a K2 Storage Area Network and direct-connect storage.
- K2 Summit Production Client and K2 Solo Media Server Field Kit Instructions
Provides instruction for installing upgrade options in the field.
- K2 Dyno Replay System Quick Start Guide
Contains the essential steps for installing and operating the bundled K2 Dyno Replay Controller and K2 Summit Production Client that ship together as a Dyno-Pack.
- K2 Dyno Controller Installation Manual
Provides instructions for a installing a K2 Dyno Replay System using a K2 Solo Media Server or a K2 Summit Production Client that is not part of a Dyno-Pack and has not been previously controlled by a K2 Dyno Controller.
- K2 Dyno Controller User Manual
Provides instructions for operating the K2 Dyno Controller application.
- K2 Dyno Controller Service Manual
Contains information for solving common setup problems, as well as information on servicing and maintenance.
- K2 Solo Media Server Quick Start Guide
Contains the essential steps for installing and operating the K2 Solo Media Server.
- K2 Solo Media Server Service Manual
Contains information for solving common setup problems, as well as information on servicing and maintenance.
- K2 Solo Media Server Accessories Installation Instructions
Provides instruction for installing accessories, such as the Handipak (handle and feet) and rack mounts.
- TimeDelay User Manual
Contains procedures for using the optional TimeDelay application as part of AppCenter.
- K2 InSync User Guide
Contains procedures for using the K2 InSync application.
- GV Connect User Manual
Provides instructions for using the GV Connect Final Cut Pro plug-in.
- K2 FCP Connect Installation Manual
Provides instructions for installing and configuring K2 FCP Connect for access to K2 stand-alone and K2 SAN systems via CIFs, iSCSI, and Fibre Channel.
The K2 Release Notes also provide important information. You receive these printed documents as part of your product packaging, or you can access electronic copies by browsing to K2 Documentation on the Grass Valley Web site.