AMS Express with front bezel. The
front bezel should be installed after rack mounting the server and remain installed for
proper cooling of the unit.
A fully loaded system is shown below with the front bezel removed. The unit
contains 12 drive bays that are numbered as shown. The drives and the LED control panel
are identified the same as the Primary Chassis.
The Control Panel on the left side of the system contains LEDs and Buttons correspond to the
respective controller and each drive bay has LEDs described below.
Control Panel LEDs and Buttons
Item |
LED/Button* |
Indication/Function |
1 |
Controller Power Status
(LED/button) |
- Blue: Power on
- Off: Power off
|
2 |
NMI (button) |
N/A |
3 |
Reset (button) |
N/A |
4 |
Controller ID
(LED/button) |
- Blue: ID for the controller
- Off: ID not lit
|
5 |
Controller Status
(LED) |
- Red: Controller degraded
- Off: Controller healthy
|
6 |
LAN1 Status (LED) |
- Yellow: LAN1 (10 GbE management network, port 1) link
activity for the controller
- Off: LAN1 link down
|
*LED/button displayed is specific
to each controller's panel: Controller A - left control panel;
Controller B - right control panel |
LEDs for each drive
Item |
LED location |
LED State |
1 |
Top Drive LED |
- Off: System off or drive not fully-seated
- Solid Blue: Online/Healthy status
- Blinking Blue: Drive access detected
|
2 |
Bottom Drive LED |
- Off: Healthy; no drive failure detected
- Solid Red: Drive error
|