AMS Express with front bezel. The
front bezel should be installed after rack mounting the server and remain installed for
proper cooling of the unit.
A fully loaded system is shown below with the front bezel removed. The unit
contains 12 drive bays that are numbered as shown.
The Control Panels on either side of the system contain LEDs and Buttons correspond to
their respective controllers and each drive bay has LEDs described below.
| Item |
Component |
| 1 |
Left Front Control Panel
(Controller A) |
| 2 |
Right Front Control Panel
(Controller B) |
Control Panel LEDs and Buttons (both control panels)
| Item |
LED/Button* |
Indication/Function |
| 1 |
Controller Power Status
(LED/button) |
- Blue: Power on
- Off: Power off
|
| 2 |
NMI (button) |
N/A |
| 3 |
Reset (button) |
N/A |
| 4 |
Controller ID
(LED/button) |
- Blue: ID for the controller
- Off: ID not lit
|
| 5 |
Controller Status
(LED) |
- Red: Controller degraded
- Off: Controller healthy
|
| 6 |
LAN1 Status (LED) |
- Yellow: LAN1 (10 GbE management network, port 1) link
activity for the controller
- Off: LAN1 link down
|
| *LED/button displayed is specific
to each controller's panel: Controller A - left control panel;
Controller B - right control panel |
LEDs for each drive
| Item |
LED location |
LED State |
| 1 |
Top Drive LED |
- Off: System off or drive not fully-seated
- Solid Blue: Online/Healthy status
- Blinking Blue: Drive access detected
|
| 2 |
Bottom Drive LED |
- Off: Healthy; no drive failure detected
- Solid Red: Drive error
|
