Configure the Management Network (Hypervisor)
Leave the following items unchanged as any changes will impact workflow performance.
- Boot Protocol = Static
- Interface Name = br0
- MTU = 1500
- Enter the remaining items with company-specific substitutions.
-
Click NEXT.
The following displays.
-
Click APPLY.
When successful, a green pop-up message appears at the top of the screen.
Several tasks will be scheduled, including a network restart PENDING message below.
Since the IP address has been changed, the system may appear stopped or hung.
-
After 5 minutes, do the following:
- Close the browser.
- Open the browser and navigate to 10.16.232.170 (the IP address entered for Controller A -Bottom).
- Login to the AMS-GUI: admin \ adminGV!
- Click LOGIN.
- Select the CONFIGURATION tab from the top, then click Management Network on the left side of the screen and ensure all settings are accurate.
- Proceed to the next task: Configure StorNext Network