Edit NAS configuration file

Before editing, take note of the following:

  • Ensure no spaces between any characters entered
  • Pay attention to upper & lower case
  • MGMT-NODE1=IP address of StorNext Bottom A / Primary
  • MGMT-NODE2=IP address of StorNext Top B / Secondary
  • MGMT_NAS_VIP=virtual IP address for the NAS
  • If renamed file system in previous step, use gvfs_bdnew instead
  1. Use nano editor to modify configuration file by adding the IP addresses and last two lines as shown in bold below.

  2. To exit the nano editor and save changes, type: <CTRL-X> Y <Enter>
  3. Confirm the edited configuration file is correct. If not, repeat step 1.

Parent topic: Create NAS Share

Copyright © 2021 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. AMS Express gvtp_20210507_00:49:21