Network switch method (preferred)

  1. Plug the 1st Ethernet cable into the Primary Controller IPMI port (#1) and the other end into Switch #A (the same switch that ports #4 were plugged into) as shown in the yellow line below.

  2. Plug the 2nd Ethernet cable into Switch #A and the other end into Ethernet port of the PC as shown in the top yellow line.
Parent topic: Connect the PC to the AMS Express

Copyright © 2021 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. AMS Express gvtp_20210507_00:49:21