Confirmation

  1. Select the file system radio button.
  2. Then, click the Refresh button in the File System list to display the new file system addition.
    Important: After initial system configuration, the RAID arrays will be building and synchronizing. Performance may be impacted for up to 24 hours.
    Note: The Usage at this point will show the increase of the Expansion Chassis to approximately 112.9 TiB if adding a single Expansion Chassis.

  3. Log off the SN-GUI by clicking in the upper right corner.

Parent topic: Configure StorNext File System

Copyright © 2021 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. AMS Express gvtp_20210507_00:49:21