Stop File Systems

To ensure the expansion happens correctly, you need to stop the file systems. The following directions assume Node1 is primary and Node2 is secondary.

This can be verified by the following:

  1. Run the following commands on Node2 to stop StorNext & NAS services (assuming still logged in as root on StorNext Node1).

    Use appropriate IP address if Node2 is not the secondary node.

  2. Run following commands on Node1 to stop NAS Services.

  3. Exit the Shell and the command line interface.

Parent topic: Expansion Chassis Setup

Copyright © 2021 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. AMS Express gvtp_20210507_00:49:21