Workgroup / gvadmin

The SAMBA NAS system may not enable the GVADMIN user, so to login would require using WORKGROUP/gvadmin.

To avoid that situation, do as follows:

  1. From the Master Node, perform the following:

    If output following the command is missing gvadmin, then you have an issue.

    Note: If gvadmin: appears in the output, then the SAMBA database is correct and you can skip this section.
  2. If you received this error message “This operation can only be run when local authentication is enabled. (E-5035)”, then run the following and wait up to 10 minutes for NAS cluster to reconfigure.

  3. After configuration completes, continue with following:

If you are still having NAS issues, see the NAS section in Troubleshooting or SFDC Knowledge Base articles.

Parent topic: Additional NAS Step

Copyright © 2021 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. AMS Express gvtp_20210507_00:49:21