Securing the system

  1. Install the bezel on the front of the server.
  2. Lift the enclosure and align it toward the front of the installed outer rail.
    CAUTION:
    Two people are needed to lift and move the system. Use care to avoid injury.
  3. Slide the enclosure toward the back of the rack.

  4. Press the inner rail latch while pushing the server to complete the installation.

  5. Open the covers of the enclosure’s ears.

  6. Secure the enclosure to the rack by using provided M5 screws.

Parent topic: Rack mounting

Copyright © 2021 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. AMS Express gvtp_20210507_00:49:21