As DLC clients

  1. Proceed with K2 Config and add any third party clients (K2 Summits, GV IO’s or GVRE’s) just like the K2 server. Go through the process and use K2 Config to fully configure those clients.
  2. Once the device has been K2 configured, remote into the client to install Stornext.

    You can get a copy from the Storage Manager by going to C:/Stornext.

  3. Copy it to the Client to the same location.
  4. Do the same for C:\Grass Valley\AMS Expess folder.
  5. Once these files and folders are copied, run the C:\Grass Valley\AMS Express\ AMS_sysman1.exe on the client.

    The AMS Express Manager Config window appears.

  6. Enter the System Manager’s name.
  7. Enter the IP addresses of the StorNext nodes and click Configure.
  8. Wait for a success message, click OK and then reboot.
  9. After the restart, Remote Desktop via SiteConfig into the client.
  10. Click on This PC and ensure V: drive is mapped and operational.

Parent topic: Adding K2 Summits, GV I/O's, GVRE's or Core servers

Copyright © 2021 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. AMS Express gvtp_20210507_00:49:21