Adding AMS Express

This section adds the AMS Express to a Grass Valley system.

On the Control Point PC, run the K2 System Configuration.
Select New K2 System.
Add the new AMS Express by entering the following information in the K2 System wizard.
Click Next.
Add a K2 Media server by entering the following information.
Click Next.
The following confirmation page appears.
Click Finish.
The K2 system configuration tree diagram appears.
Select [K2 Server1] and click Configure.
Enter following information to define server roles.
Click Next.
The confirmation dialog appears.
Click Yes.
The Software Configuration window appears.
Click Check Software.
The Validation Report appears after the Check Software process is completed.
Click Close and click Next on the Software Configuration window.
Click Next for network configuration.
Click Check on file system configuration.

The Validation Report appears after the process is completed.
Click Close and click Next on the File System Server Configuration window.
The Third Party CIFS Configuration window appears.
For the SMB Configuration, enter the following information:
- For the high resolution share UNC path, use the NAS Mount VIP address and the file system name
- For credentials, use gvadmin/adminGV!
CAUTION:
The tab sequence is out of order after password.
Click Apply.
The Validation Report appears.
Click Close and click Next on the Third Party CIFS Configuration window.
For Metadata server, click Next.
For FTP Server configuration, enter the following information.
Click Next.
The Configuration Wizard appears.
Click Finish.
The reboot notification dialog appears.
Click OK.
The reboot confirmation dialog appears.
Click OK to reboot.