NAS configuration

Note: This step will take up to 10 minutes to complete. Be patient as it will appear as nothing is happening or ‘UNHEALTHY’ text will show. This is normal.
  1. Run the NAS configuration script which utilizes the information from the configuration file.
    [root@xwd-gv1b ovfconfig]# ./nas_configure.sh
    Logging to /var/log/DXi/nas_configure.log
    Wed Dec  1 15:46:52 CST 2021 [28315]: Running ./nas_configure.sh
    Wed Dec  1 15:46:52 CST 2021 [28315]: Running ./nas_configure.sh
    NAS cluster not configured for this node
    Wed Dec  1 15:46:53 CST 2021 [28315]: Enabling NAS
    /usr/lib64/python2.7/getpass.py:83: GetPassWarning: Can not control echo on the terminal.
      passwd = fallback_getpass(prompt, stream)
    Warning: Password input may be echoed.
    Password:
    Warning: Password input may be echoed.
    Enter password again:
    NAS services will take over the following config
    files. Custom modification will be lost:
    /etc/exports
    /etc/samba/smb.conf
    /etc/nsswitch.conf
    /etc/sssd/sssd.conf
    /etc/ldap/ldap.conf
    Set password for 'sysadmin' user
    Enabling NAS services
    Nas enable registry set
    Waiting for NAS to be runnable
    NAS services are now enabled and running.
    Wed Dec  1 15:47:26 CST 2021 [28315]: Configuring NAS
    Wed Dec  1 15:47:26 CST 2021 [28315]: Setting master to 10.65.168.235
    Updating NAS cluster configuration ...
    Verifying NAS cluster configuration for 10.65.168.235 ...
    NAS cluster enable node 10.65.168.235 starting...
    Updating system NAS cluster configuration ...
    NFS: services (v4=no, v3=yes, HA=no)
    Setting master local auth config ...
    Applying local configuration settings ...
    Master node successfully enabled for NAS cluster using 10.65.168.235
    Wed Dec  1 15:47:39 CST 2021 [28315]: Enabling node 10.65.167.96
    Updating NAS cluster configuration ...
    Verifying NAS cluster configuration for 10.65.167.96 ...
    Node 10.65.167.96 successfully enabled for NAS cluster
    Wed Dec  1 15:47:40 CST 2021 [28315]: Setting VIP to 10.65.167.197
    NAS Cluster preparing to set virtual IPs: 10.65.167.197 ...
    Verifying virtual IPs: 10.65.167.197 ...
    NAS Cluster setting paused state ...
    NAS Cluster updating virtual IP addr list to: ['10.65.167.197'] ...
    NAS Cluster applying virtual ipaddr settings ...
    Updating system NAS cluster configuration ...
    NFS: services (v4=no, v3=yes, HA=no)
    NAS Cluster clearing paused state ...
    Virtual IP addresses ['10.65.167.197'] successfully stored
    Wed Dec  1 15:47:56 CST 2021 [28315]: Doing cluster join on /Volumes/gvfs_sysman1
    NAS Cluster join starting ...
    NAS Cluster ID 46e71f7c-52f0-11ec-96f4-00308c7b610f found ...
    Preparing for NAS cluster join as ID 10.65.168.235
    Applying NAS cluster join settings ...
    Updating system NAS cluster configuration ...
    NFS: services (v4=no, v3=yes, HA=no)
    Check for master takeover ...
    Publish master configuration ...
    Cluster verification for 10.65.168.235 in-progress ...
    Node state: pnn:0 10.65.168.235    UNHEALTHY (THIS NODE), waiting ...
    Node state: pnn:0 10.65.168.235    OK (THIS NODE)
    Cluster verification of 10.65.168.235 successful ...
    Waiting for NAS Master VIP 10.65.167.197 to be reachable ...
    Successfully joined NAS cluster
    Wed Dec  1 15:48:39 CST 2021 [28315]: Doing cluster join on /Volumes/gvfs_sysman1 for node 10.65.167.96
    Waiting for config already in-progress ...
    wait complete
    NAS Cluster join starting ...
    NAS Cluster ID 46e71f7c-52f0-11ec-96f4-00308c7b610f found ...
    Proxy join to 10.65.167.96 ...
    [10.65.167.96]: NAS Cluster join to cluster ID 46e71f7c-52f0-11ec-96f4-00308c7b610f starting ...
    [10.65.167.96]: NAS enabling ...
    [10.65.167.96]: Preparing for NAS cluster join as ID 10.65.167.96
    [10.65.167.96]: Verifying local configuration with master 10.65.168.235 ...
    [10.65.167.96]: Synchronization of local configuration with master 10.65.168.235 starting...
    [10.65.167.96]: Applying local auth config sync settings ...
    [10.65.167.96]: Applying local configuration settings ...
    [10.65.167.96]: Applying NAS cluster join settings ...
    [10.65.167.96]: Updating system NAS cluster configuration ...
    [10.65.167.96]: NFS: services (v4=no, v3=yes, HA=no)
    [10.65.167.96]: Verifying local configuration with master 10.65.168.235 ...
    [10.65.167.96]: Cluster verification for 10.65.167.96 in-progress ...
    [10.65.167.96]: Node state: pnn:1 10.65.167.96     UNHEALTHY (THIS NODE), waiting ...
    [10.65.167.96]: Node state: pnn:1 10.65.167.96     OK (THIS NODE)
    [10.65.167.96]: Cluster verification of 10.65.167.96 successful ...
    Successfully joined NAS cluster
    Wed Dec  1 15:49:46 CST 2021 [28315]: Doing share change smb global named streams
    Broadcasting share config-sync to NAS cluster ...
    Waiting for nascluster_share_config_sync to complete on node 10.65.167.96
    Share global successfully changed
    Wed Dec  1 15:49:48 CST 2021 [28315]: Checking if share gvfs_sysman1 exists
    Wed Dec  1 15:49:48 CST 2021 [28315]: Share gvfs_sysman1 not found, creating..
    Adding share to existing directory
    Broadcasting share config-sync to NAS cluster ...
    Waiting for nascluster_share_config_sync to complete on node 10.65.167.96
    Share gvfs_sysman1 successfully added
    Wed Dec  1 15:49:50 CST 2021 [28315]: Setting cifs.allow_trusted_domains in the registry
    Registry key 'cifs.allow_trusted_domains' set to '1'.
    Wed Dec  1 15:49:57 CST 2021 [28315]: Adding local user gvadmin
    NAS Cluster IP: 10.65.168.235/em2, Master: Yes, SNFS Root: /Volumes/gvfs_sysman1, Joined: Yes
    ID: 46e71f7c-52f0-11ec-96f4-00308c7b610f
    Cluster Hostname:
    DNS Enabled: No
    Load balancing: Proxy-Disabled
    NFS-HA: Disabled
    Cluster VIP: 10.65.167.197 (active) nas-test-gv1b.mdh.quantum.com
    Nodes: 2
      *1: 10.65.168.235 (Joined, MDC) xwd-gv1b
       2: 10.65.167.96 (Joined, MDC) xwd-gv1a
    Wed Dec  1 15:49:59 CST 2021 [28315]:  complete, RC=0
    [root@xwd-gv1b ovfconfig]#
    
  2. Exit the shell.

  3. Ping the NAS VIP to ensure it is accessible.

  4. Exit the CLI.


Copyright © 2021 - 2022 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. AMS Express 1.5 gvtp_20220429_09:58:17
Other Topic Library Versions