Configuring the Alarm Dialog

  • Select Configuration> CommandCenter Configuration and click the Alarm tab.

Alarm Log Time

Video Standard

The time for the event view is displayed in the following format hh:mm:ss:ff where ff is the frame number. The video standard setting determines the number of frames in a second. Select PAL for 25fps and NTSC for 30fps.

Alarm Log Maintainance

Clear Alarm Log on Application Startup

The check box option allows the historical alarm log data to be cleared every time the application is started, this means that only the current status of the system is shown when the application is started.

Clear Alarm Log

This button clears all the historic data from the event log.

ACP Log Settings

Log Control Changes

The Event log can optionally display any control changes seen on the ACP network or not, these control events will be displayed in a light blue color, as well as the event description starting with the text 'Control -' . Only changes in values are seen in the log, so repeated broadcasts of the same control value will not be logged to save on storage requirements.

Router Control Log Settings

Log Crosspoint Changes

This option will enable the logging of all crosspoint changes from routing devices connected to the Event log.

Log Lock/Protect/Release Changes

This option will enable the logging of all lock/protect/release changes from routing devices connected to the Event log.

Generic Device Log Settings

Log Object Value Changes

Select this option to log any UMD changes.

Log GPI Changes

Select this option to log any GPI changes.

Log GPO Changes

Select this option to log any GPO changes.

Log UMD Changes

Select this option to log any UMD changes.

SNMP Log Settings

Log Received SNMP Traps

Select this option to log any received SNMP traps.

Log Received SNMP Trap Variables

Select this option to log any received SNMP trap variables.


© 2014 Grass Valley USA, LLC. All rights reserved. Grass Valley is a registered trademark of GVBB Holdings S.a.r.l.