Basic Operation

The currently selected destination is displayed in the “Destination” OLE display. To change the selected destination:

1. Press the Select button just to the left of the knob.
2. The panel will enter the “MENU” mode. The SXY has only one sub-menu selection currently (Destination).
3. Press the Select button again to enter the Destination selection mode.
4. Use the knob to scroll through the destinations until the required one is found.
5. Press the Select button again to choose the destination.

   Once selected, the new destination will appear in the Destination display. The Status display will also update to show the primary source (and its levels) routed to that destination.

   The current preset source is displayed in the Preset OLED display. To select another preset source:

   • Simply rotate the knob to scroll through the sources, or use the cluster of 16 buttons on the right to select a source by mnemonic.
6. Press the Take button to take the preset source to the destination. The old source becomes the preset source, so repeatedly pressing the Take button will toggle between the two sources.