Configuring Router Control from a Panel

Be sure the router you want to control is connected. After opening an existing panel or creating a new panel, you will configure it to control your router.

1. From your panel, right click on the panel or from the Edit menu, select Router Panel. The Router & Category Panel dialog displays. From the Router & Category Panel dialog, you will name the router and set the level and destinations.

   

2. Name the router being controlled. The name of the router must be the exact name of the router being controlled if you want to control Routemaster.
3. Set the default destination. Note that the default destinations and levels determine the initial panel configuration. The destination is normally identified with the ID number of the item being controlled. (The format is typically |ID|1, |ID|2, etc.)
4. Set the default levels. These levels determine which levels and be initially controlled. (The format is typically |ID|1, |ID|2, etc.)

   Subsequent control of Sources Destinations and Levels depends on what functionality is given to the panel. The next step is to program the hardware panel source buttons.