Using Level Mode

This mode is used for creating breakaways. In this mode, a single destination is selected. The panel displays the set of configured levels, and the current source for each level for the selected destination.

To select a different destination for this mode:

  1. Press the knob.
  2. Press “Select Destination?” and press the button corresponding to the desired destination.
  3. Press the button corresponding to the desired destination. The panel returns to the Level Mode, and updates to display the selected destination. By default, all of the levels are selected. To deselect one or more levels, press their corresponding buttons. The buttons will display orange to indicate that they are deselected:
    To create a breakaway:
    • Deselect the levels that are not required.
    • Press the “Select Source?” button.
    • Select the required source. (Use the knob to scroll through additional pages of sources).

      The selected level buttons will update to show the newly selected preset source:

    • Press the “Take” button. The selected levels will update to show the current source:
    • To lock a set of levels, ensure the required levels are selected.
    • Press the “Lock” button. The buttons will update to display the lock status for each level:

© 2014 Grass Valley USA, LLC. All rights reserved. Grass Valley is a registered trademark of GVBB Holdings S.a.r.l.