Using Multiple Destination Mode
In this mode, each button represents a different destination. The current source for
each destination is also displayed on the LCD button.
Unlike other modes, multiple destinations can be selected.
- To select a destination, press the corresponding button. To deselect a destination, press it again. The knob can be used to scroll through additional pages of destinations.
To perform a multiple destination take:
- Select one or more destinations by pressing the corresponding buttons.
- Press the “Select Source?” button to enter source selection mode, and press the button corresponding to the desired source. (Use the knob to scroll through additional pages if necessary).
-
Once the source button is pressed, the source is selected
for preset, and the panel returns to the destination selection mode. The selected
destinations now show the current source, and the newly selected preset source:
- To take the preset source for all of the selected destinations, press the “Take” button. The buttons update to show the newly selected sources:
From Multiple Destination Mode, it’s also possible to lock and unlock multiple destinations. The lock buttons performs a toggle action, so locked destinations become unlocked and vice versa.- To lock multiple destinations, select them by pressing the corresponding buttons so that they are highlighted cyan:
- Press the “Lock” button. Observe that the buttons change color, and indicate the owner of the lock:
- To unlock multiple destinations, select one or more locked destinations and press the “Lock” button.
- To deselect all destinations, and clear any preset sources, press the “Clear” button.