Configuring an XY Panel

  1. From Add Network Device, select Add Control Panel.
  2. Select the Panel Type.
  3. Enter the Device Name.
  4. Enter the Primary IP Address.
  5. Select the Panel File Name.
  6. Select the Initial Settings File.
  7. If the panel has Redundant power supplies, then select the box.
  8. Click Add. The panel will be added to the system.
Parent topic: Router Configuration Tasks

© 2013 Grass Valley USA, LLC. All rights reserved. Grass Valley is a registered trademark of GVBB Holdings S.a.r.l.