When [Audio Monitoring Mode] is set, clips on the Recorder can be played back with the different setting from that of the audio output set in the channel map of [Sequence settings] or [Project Settings]. In [Audio Monitoring Mode], audio output of the clip played back on the Player can also be set.
|
|
|---|
|
1) Click [Change to Player]/[Change to Recorder] to switch to the display window to be set.
2) Click [View] on the menu bar, and click [Audio Monitoring Mode] → the mode to be set.
|
[Off] |
Output the original channel of the source on the Player. Output audio according to the settings in [Channel map] of [Sequence settings] on the Recorder. |
|
[Monaural] |
Output audio in monaural. Downmix to L (Ch1) and R (Ch2) to be the same audio. |
|
[Stereo] |
Output audio in stereo. Divide the audio to L (Ch1) and R (Ch2) and downmix by decreasing 3 dB. |
|
[Custom] |
Play back audio in the mode set in [Custom setting]. |
|
[Custom setting] |
Customize [Audio Monitoring Mode]. The customized settings can be saved and loaded as presets. |
Alternative
Set this function in [Audio Monitoring Mode] in the [Audio Mixer] dialog box.
Default value can be changed with the [Audio Monitoring Mode] setting in [System Settings]. Changed default value is applied when the project starts.
