The following explains the checks to perform before capturing sources and precautions when connecting to external devices.
Register connection information, video format and other information when importing sources as device presets for Grass Valley products, cameras, decks, and other external devices used for capture.
Before setting, connect the external devices to synchronize the input signal. The following cases may occur depending on the characteristics of the input devices and the recording state of the tape:
Batch capture cannot be performed correctly.
Unnecessary files are generated by automatic division.
Unnecessary files are created at start of capture.
Capture settings can be checked and changed by [Application] in [System Settings] → [Capture].
Before capture, connect your PC to a camera or other external device to import the source from.
To capture HDV standard sources, connect the HDV device to the IEEE1394 terminal on your PC with a DV cable. If your HDV device supports the HDV mode, set the device to the HDV mode. For more information on settings, see the instruction manual for your HDV device.
To capture DV standard sources, connect the DV device to the IEEE1394 terminal on your PC with a DV cable.
For more information on connecting to DirectShow base devices such as web cameras and microphones, and analog devices, other input devices, and external monitors, see the user manual included with the product.
To Top
