Control Surface IP Configuration
On start-up on the Control Surface touchpad, an initial screen may appear.
If the
Control Surface is not yet configured for an IP connection with GV Director Server:
- Enter the IP address for the server to be connected to your Control Surface.
Server default IP address is: 192.168.100.100
The Control Surface and the server are pre-configured with factory-set IP addresses.
Control Surface default IP address is: 192.168.100.101
These IP addresses are configured for the Static IP Ethernet connections on the right of both Control Surface and server. The Ethernet connections on the left of the backplane are set for DHCP enabled for network assignable IP address.