Lever Arm Calibration Setup

You set up the calibration for the lever arm from the Configuration menu. You must place the lever arm in the down up down position to set it up.

1. From the Configuration menu, select Lever Arm Calibration.

   

   The Lever Arm Calibration screen displays.

   

2. A confirmation screen appears and instructs you to move the lever arm to the down position. Tap OK.
3. A confirmation screen appears and instructs you to move the lever arm to the up position. Tap OK.
4. A confirmation screen appears and instructs you to move the lever arm to the down position again. Tap OK.