Build and Take to Air a Compound Element During Production (Shortcut)

A compound element can be built and taken to air using the assignable selection buttons on the GV Director Control Surface.

1. Select the Stage menu in one of the following ways:
   • Tap the Stage button.
   • Press the Stage/PVW button on the GV Director Control Surface, below and left of the Touchpad.
2. Hold down the Stage/PVW button (below and left of the GV Director Touchpad).
3. While holding down the Stage/PVW button, press the Control Surface selection buttons with the production elements assigned that will make up the compound production element.
4. Release the Stage/PVW button.
5. Press the Take button (just right of the green Stage/PVW button).