About Modifying Audio Parameter Settings

The GV Director system supports the mixing of embedded audio on all 8 live SDI inputs and all Shotbox positions. Each source can have up to 16 audio tracks. Levels can be set on two analog inputs.

The audio mixer can be accessed from several places, the radial menu, the configuration menu in the Control Panel; accessed by swiping down from the top middle of the Touchpad, and in some menus in the upper right of the screen. To use the radial menu, double-tap a live input in the Live menu or a clip in the Clips & Stills menu, hold, and drag out until the Audio ring is highlighted and release. The mixer then appears where you can adjust individual channel levels as well as mute and solo each channel. The cog icon at the top right allows you to quickly access the audio faders for any of the other live or shotbox sources without having to come out of the mixer mode. So, for example, if audio is coming in on channels 1&2 on each of my first 4 camera feeds then I could simply solo tracks 1&2 on the first 4 live inputs. Levels can then be adjusted to make sure none are coming in too hot or too low. These adjustments would be done as part of the lineup before the show goes live.

Double-tapping an audio channel resets the channel to the default parameter settings.