Replace the video I/O module

The top cover is removed.

DANGER
To avoid serious injury from high currents, ensure that both power cords are disconnected prior to removing or replacing any parts.

  1. Discconnect the audio module ribbon cable and 6-pin power cable.
  2. Remove the four screws that secure the video I/O module to the server chassis.
  3. Remove the three screws that secure the I/O connectors to the server chassis.
  4. Holding the video I/O module on each side, lift the module straight up.
Parent topic: About removing and replacing Field Replaceable Units
Related topics:
Remove the GV Director Server top cover

Copyright © 2014 Grass Valley. All rights reserved. GV Director gvtp_20141023_16:10:19