Using Stage to Preview

Any production element can be previewed by placing it in the Stage prior to taking it to air.

To Stage an input or clip:

  • Press and hold the Stage/Preview button in the bottom-right of the assignable button area of the Control Surface.
  • Hold the Stage button.
  • Select an input or clip either from an assignable button or from the menu on the Touchpad..
  • That input source or clip will be displayed in the Stage monitor.
  • Press the Take button on the Control Surface to put the staged source to program to air using the primary transition.
Parent topic: Basic Switching with the GV Director Control Surface

Copyright © 2014 Grass Valley. All rights reserved. GV Director gvtp_20141023_16:10:19