Other Topic Library Versions

Enable Traps on Windows Devices

You can enable Traps on Windows Devices to work with Grass Valley remote management.
  1. Open the Windows Services Control Panel.
  2. Verify that SNMP Services is displayed and proceed as follows:

    • If SNMP Services is displayed, skip ahead to the next step.
    • If SNMP Services is not displayed, you must install it. Continue with the following substeps.
    1. Open the Windows Programs and Features Control Panel.
    2. Select Turn Windows Features on or off. The Windows Features dialog box opens.
    3. Select Simple Network Management Protocol (SNMP).
    4. Click OK.
  3. In Windows Services Control Panel, double-click SNMP Services. The SNMP Service Properties dialog box opens.
  4. Select the Traps tab.

  5. Enter the community name (user group) and then click Add to list.
  6. In the Trap destinations field, click Add and then enter the IP address (trap destination) of the GV GUARDIAN SNMP Monitoring Server.
  7. Click Apply and OK to save settings and close.
Parent topic: GV GUARDIAN Topic Library

Copyright © 2017 Grass Valley Canada. All rights reserved. GV GUARDIAN 2.0 gvtp_20171020_00:54:09