Preparing for GV I/O installation of SDI option
- Verify that the AJA Corvid 88 card is installed with the desired feeds attached.
- Procure the GVIO-Prerequisites-4.x.zip file that includes all GV I/O prerequisite files. This .zip file contains software components that will be used later in the procedure.
- Verify that the ntv2firmwareinstaller.exe and corvid_88_34.bit files must be in the same directory as the .bat file BEFORE you run UpdateAjaFirmware.bat.
This procedure is not required if you received your GV I/O server from the factory. Otherwise, proceed with the steps below:
- Install this AJA driver manually: ntv2driver-14.3.2.msi
- Run the UpdateAjaFirmware.bat file.
- Power Cycle the system.
-
Run the WeightNetworkAdapters PowerShell script after reviewing its associated
README.txt file and enter the names of your adapters as follows:
- Control Connection
- FTP Connection (for internal storage) OR Media Connection (for shared storage)
- Unused 1
- Unused 2