Make sure the installation meets the detailed physical and environmental
requirements for the installation site.
A #2 Phillips screwdriver is required to install Phillips head screws for the rack
rails.
A standard flat-head screwdriver is required to install flat head screws for the
rack rails.
Ensure adequate air flow around
the chassis to provide sufficient cooling. Operating ambient temperature will affect
the amount of air circulation required to keep the system within its temperature
limitations.
Ensure that safety labels located
on the top of the unit are visible after installation. This requires sufficient open
space over the unit without cables or other devices impeding the view.
If the system is installed
with its ventilation intakes near another system's exhaust or in a closed or
multi-unit rack assembly, the operating ambient temperature inside the chassis
may be greater than the room's ambient temperature. Install the system in an
environment compatible with this recommended maximum ambient temperature.
Ensure that the power
socket-outlet is installed near the equipment and is easily accessible.
Ensure the rack is anchored to
the floor so that it cannot tip over when the system is extended out of the rack.
Be sure to mount the system in a
way that ensures even weight distribution in the rack. Uneven mechanical loading can
result in a hazardous condition. Secure all mounting bolts when installing the
chassis to the rack.
