Install software manually for GV I/O with SDI option
- Verify that the AJA Corvid 88 card is installed with the desired feeds attached.
- Verify that SDI cabling is done according to these latest cabling instructions:
- You have procured the necessary GV I/O software and prerequisite files for the upgrade. Go to Grass Valley products compatible with GV I/O and Third party products compatible with GV I/O to determine the compatible software versions required.
This procedure is not required if you received your GV I/O server from the factory. Otherwise, proceed with the steps below:
-
Obtain GVIO-Prerequisites-5.x.zip file from ftp.grassvalley.com and
unzip to a temporary folder on the GV I/O unit.
This .zip file contains software components that will be used later in the procedure.
- Stop AppCenter if it is running.
- Stop the AppService applicaton.
- Change Embedded Security Manager to Update Mode.
- Execute the installer for the Zulu Java JDK: zulu11.41.23-ca-jdk11.0.8-win_x64.msi
- Execute the GV Engine installer: GVEngineInstaller-x.x.x.xx_vcxxx.exe
- Execute the NVIDIA installer: 452.57-quadro-winserv-2016-2019-64bit-international-whql.exe
- Change Embedded Security Manager to Enabled Mode.
- Reboot the GV I/O unit.