GV I/O Record Channel settings
These settings are optional on GV STRATUS systems, and only applicable to GV I/O record channels.
To locate these settings, click General | Channels | GV I/O and select a channel type configured to Record.
Setting or button | Description |
---|---|
Channel | The name of the GV I/O channel. |
Channel Type | The Channel Type selected is Record
for the GV I/O Live Ingest and Playout Server. Note: The GV STRATUS
desktop application needs to be restarted after changing
a GV I/O channel type from Playout to Record or from
Record to Playout in order to see updated configuration
options in the Channel Panel tool.
|
Channel Input | Input signal type that has been connected to the channel at the GV I/O Live Ingest and Playout Server. Available input signals are in the
list below:
|
Label | The label of the GV I/O channel. |
Receiving IP | For a channel configured for SMPTE 2110 or SMPTE 2022-6 input signal type, enter the IP address that goes with the SFP connector used to receive the media stream. |
Enable 2022-7 Redundancy | Select this box to enable redundancy of ingests. This is only applicable when SMPTE 2110 is selected for the Channel Input. |
2022-7 Receiving Interface | When the enable 2022-7 redundancy check-box is selected, a 2022-7 Receiving Interface (IP address) is also required, and it represents the IP address of a second GV I/O input as the backup. |
Update SDP File | Select the location to import the SDP file from. This is only applicable to SMPTE
2110 option as it requires an import of data from a .sdp file
for the GV I/O configuration. Upon updating the .sdp file and clicking Save, or after clicking another SMPTE 2110 channel, the field becomes blank and does not display the existing SDP file configuration. |
IP Stream / Web Stream | Enter the URL in the form of rtp://ip_address:port_number as described for SMPTE 2022-6 or Web Stream in the Channel Input description above. |
Channel Format | Select a format for the channel from the drop-down list. Available formats are as configured in Format settings in the GV STRATUS Control Panel. The setting determines the video format expected at the GV I/O channel’s input. This setting also determines the video codec used to compress the video while recording. |
Audio Tracks | Select the number of audio tracks supported for recordings via the channel. You can select up to 16 audio tracks for each channel. |
Click Save to save the current settings. If you click Revert, the application discards any new settings and reverts to the last saved settings.