Configuring a GV I/O Playout NDI channel
You must install GV I/O licenses before configuring the channels. UHD, HDR, and NMOS
configurations require specific licenses on the GV I/O device.
-
Click on the Channels tab, and
select the specific GV I/O channel that you want to configure.
-
Click the Configure button.
The Channel Configuration page displays.
-
Click on the drop-down list and select the appropriate
option for each setting:
Setting or button Description Type Select the Type as Playout to configure a GV I/O playout channel. Output Output signal type for the selected channel of the GV I/O Live Ingest and Playout Server. Select the channel output as below: - Unassigned - The channel output is set to this
initial setting by default. No other settings are configurable when this
option is selected. Note: Changing a channel's I/O configuration to Unassigned will set channel configuration information to a default state and release any SabreTooth licenses associated with the channel.
- NDI - Configures the channel to use NDI output. Requires the GVIO-SW-NDI-CH license per channel, with maximum of 4 channels per GV I/O server.
Label The label that you can assign for the GV I/O channel. Channel Format Select a format of either SD, 720p, 1080i, 1080p, or 2160p. Aspect Ratio Select an available aspect ratio of either 4:3 or 16:9. Aspect Ratio Conversion Select an aspect ratio conversion for the playout channel from the list below: - Bars
- Half Bars
- Crop
- Stretch
Dynamic Range Type Select a dynamic range type for the channel from the drop-down list. The default is set to SDR, as this is the only available option for an NDI channel. Loop Select to enable or disable the Loop mode for the Playout channel - Unassigned - The channel output is set to this
initial setting by default. No other settings are configurable when this
option is selected.
-
Configure Automation Settings as follows:
Setting Description Protocol Select AMP or VDCP protocol for automation control of the channel. - Click Apply to save your current settings, or click Back to return to the last saved settings.
Parent topic: Configuring the GV I/O Live Ingest and Playout Server
Copyright © 2018 - 2022 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. GV I/O 5.0 gvtp_20220624_17:51:56