Configuring a GV I/O Host
You must install GV I/O licenses before starting the configuration.
-
On the Hosts tab, select the
specific GV I/O host that you want to configure.
-
Click the Configure button.
The configuration page displays.
-
For System Configuration and
NMOS settings, click each drop-down list and select the
appropriate option as below:
Setting Description Reference Standard Select the reference standard to be used on the GV I/O device, either NTSC or PAL. Preview Stream To configure a preview stream in your operation, select NDI. This feature requires the GVIO-SW-NDI-PRVW license per GV I/O server, and GVIO-SW-NDI-CH license per channel with the maximum of 4 channels per server. By default, this setting is set to None in the configuration settings.
Preview Source Select a source for the preview stream as follows: - Quad-View - For a multi-viewer quad split preview of all 4 channels
- Channel Name - For full frame preview of a single channel from (C1, C2, C3, or C4)
Audio Preview Select a single audio channel for the preview stream from (C1, C2, C3, or C4). NMOS Discovery and Registration Select to enable or disable the NMOS (IS-04/05) specification for GV I/O device discovery and registration. The GV I/O must have the GVIO-SVR-IP license to enable the NMOS setting. -
If NMOS Discovery and Registration setting is enabled and
NMOS Registry Selection is set to Manual, select other additional
settings as the following:
Setting Description NMOS Registry Selection Select the NMOS Registry selection to be Auto or Manual. Select Auto for an automatic NMOS Registry discovery.
The Manual selection can be used to manually select an NMOS Registry, overriding the automatic NMOS Registry discovery for the site.
NMOS Registry IP Address Enter the IP address of the NMOS Registry to be used by the GV I/O unit. NMOS Registry Registration Port Number Enter the port number that the NMOS Registry is configured to use for the NMOS IS-04 Registration API. NMOS Registry Query Port Number Enter the port number that the NMOS Registry is configured to use for the NMOS IS-04 Query API. -
To add a remote NDI source, click the button and enter the IP address
of the remote source.
To remove a remote NDI source, click the button.
-
To view installed licenses on the GV I/O device, click the
Licenses panel.
Details of installed licenses are displayed as below.
- Click Apply to save your current settings, or click Back to return to the last saved settings.
Parent topic: Configuring the GV I/O Live Ingest and Playout Server
Copyright © 2018 - 2022 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. GV I/O 5.0 gvtp_20220624_17:51:56