Preparing for GV I/O installation of SDI option
- Verify that the AJA Corvid 88 card is installed with the desired feeds attached.
- Procure the GVIO-Prerequisites-5.x.zip file that includes all GV I/O prerequisite files. This .zip file contains software components that will be used later in the procedure.
- Verify that the ntv2firmwareinstaller.exe and corvid_88_34.bit files must be in the same directory as the .bat file BEFORE you run UpdateAjaFirmware.bat.
This procedure is not required if you received your GV I/O server from the factory. Otherwise, proceed with the steps below: