Ports and services mapping

Software components run as Windows services, which communicate over designated ports. Do not create your own convention for port usage. Designate ports as specified in the following:

80: Protocol: TCP. Traffic: HTTP. Used by any GV STRATUS server or MediaFrame server.
445: Protocol: TCP. Used by SDB and XMOS Server and NAS. Used by SiteConfig. File and printer sharing. Used by CIFS/SMB.
1223: TCP: Used by EDIUS XRE Server.
1433: TCP: Used by DSM.
2000: Protocol: TCP. Used by SDB Server incoming, and by GV STRATUS and GV STRATUS Rundown clients outgoing.
2001: Protocol: TCP. Used by SDB Server incoming, and by GV STRATUS and GV STRATUS Rundown clients outgoing.
2002: Protocol: TCP. Used by backup SDB Server incoming, and by GV STRATUS and GV STRATUS Rundown clients outgoing.
2003: Protocol: TCP. Used by backup SDB Server incoming, and by GV STRATUS and GV STRATUS Rundown clients outgoing.
3000: Protocol: TCP. Used by XMOS Server incoming, and by GV STRATUS and GV STRATUS Rundown clients outgoing.
3001: Protocol: TCP. Used by XMOS Server incoming, and by GV STRATUS and GV STRATUS Rundown clients outgoing.
3811: Protocol: TCP. Used by SDB Server incoming, and by GV STRATUS and GV STRATUS Rundown clients outgoing.
3838: Protocol: TCP. Used by GV STRATUS Ingest services.
3839: Protocol: TCP. Used by GV STRATUS Ingest services.
7213: Protocol: TCP. Used by GV STRATUS Router Controller service.
7144: Protocol: TCP. Traffic: HTTP. Used by GV STRATUS Router Config service for configuration.
7145: Protocol: TCP. Traffic: HTTP. Used by router config data service.
8000: Protocol: TCP. Traffic: HTTP. Used by GV STRATUS Common Services, including preferences, licensing, authorization. Used by Proxy config, Web Monitor data service.
8080: Protocol: TCP. Traffic: HTTP. Used by GV STRATUS Summit Services. Used by WCF service provided by the GV STRATUS Workflow Engine. Used by WCF service provided by the GV STRATUS Rules Engine.
8100: HTTP/TCP: Used by Macintosh systems for the SabreTooth licensing web service to check out licenses
8511: Protocol: TCP. Traffic: HTTP. Used by playout config data service.
8732: Protocol: TCP. Traffic: HTTP. Used by Site Config data service .
8733: Protocol: TCP. Traffic: HTTP. Used by K2 Config data service .
8734: Protocol: TCP. Traffic: HTTP. Used by Site Config data service .
8735: Protocol: TCP. Traffic: HTTP. Used by K2 Config data service.
8737: Protocol: TCP. Traffic: HTTP. Used by GV STRATUS Ingest Config service for configuration. Used by GV STRATUS Control Panel Services for K2 Remote storage configuration. Used by GV STRATUS Core Server.
8740: Protocol: TCP. Traffic: HTTP. Used by general config data service.
8742: Protocol: TCP. Traffic: HTTP. Used by Send destination config data service.
8744: Protocol: TCP. Traffic: HTTP. Used by RMI config data service.
9010: TCP: Used by GV Ask service.
9012: TCP: Used by GV License Manager.
9014: TCP: Used by GV Metadata. Not visible on a configuration page.
9016: TCP: Used by GV Resolver. Not visible on a configuration page.
9018: TCP: Used by GV RulesWizard. Not visible on a configuration page.
9019: TCP: Used by GV RulesWizard. Not visible on a configuration page.
9020: TCP: Used by GV Transfer Manager.
9022: TCP: Used by GV Asset Manager.
9023: TCP: Used by GV Asset Manager.
9024: TCP: Used by GV Subscription Manager.
9110: TCP: Used by GV Proxy MDI.
9115: TCP: Used by GV NTFS MDI.
9122: TCP: Used by GV DIVA MDI.
9124: TCP: Used by GV FlashNet MDI.
9130: TCP: Used by GV Profile MDI. The service manages one host process for each managed Profile. These host processes require ports 9130-9139. Stopping/starting the service stops/starts all of the host processes.
9140: TCP: Used by GV MSeries MDI. The service manages one host process for each managed M-Series iVDR. These host processes require ports 9140 - 9149. Stopping/starting the service stops/starts all of the host processes.
9150: TCP: Used by GV News Share MDI.
9160: TCP: Used by GV K2 MDI and GV K2 Summit MDI Service. The service manages a number of host processes, one for each K2 system that is being managed. These host processes require ports 9160 - 9169. Stopping/starting the service stops/starts all of the host processes.
9170: TCP: Used by GV FTP MDI in the Aurora workflow, which can use a range of ports, starting with this port number.
10540: TCP: Used by XMOS Server incoming and outgoing MOS communication.
10541: Protocol: TCP. Used by SDB Server incoming, and by GV STRATUS and GV STRATUS Rundown clients outgoing.
12345: TCP: Used by Ingest Router Port.
31820: Protocol: UDP. Used for live streaming from K2 Summit/Solo systems. This is the default base for UDP ports, with the range being 31820 to 31827. Other ranges are possible, depending on the UDP port base configured on the K2 Summit/Solo system.
49168: HTTP/TCP: Used by Grass Valley K2 Config for K2Config application connection between a control point PC and the K2 system device configured. Used for most functions.
49169: TCP: Used by Grass Valley K2 Config for K2Config application connection between a control point PC and the K2 system device configured. Used for a few functions that require longer time periods.

The system also depends upon Microsoft Internet Information Services (IIS) and SQL services.