Other Topic Library Versions

Configure Avid ISIS send destinations

Only systems that send assets to Avid ISIS storage require this process.
  • The MEWS system must be installed and operational.
  • The MEWS system must be configured in GV STRATUS Control Panel Engines settings.
  • The Avid ISIS storage system must be installed and operational.
Configure a location as follows:
  1. In GV STRATUS Control Panel, navigate to General | Locations Config | Locations Configuration | Add.



  2. Configure as follows:
    Setting or button Description
    Location Name The name of the location, as it appears in the application. This can be any name, as appropriate for your workflow. This identifies the Avid ISIS storage when sending assets to Avid in the GV STRATUS application.
    Description Your description of the location.
    Source / Destination Set to Destination.
    Usable by Set to Avid ISIS.
    Location Path The UNC path to the Avid MediaFiles\MXF folder within the required workspace on the Avid ISIS storage.
    Location Path Credentials The credentials required to access the location.
    Host Name The host name of the Avid ISIS storage location. This setting is only applicable when Avid ISIS system is selected.
  3. Click Apply.
Parent topic: Setting up Avid workstations with GV STRATUS
Related topics:
Avid/MEWS considerations

Copyright © 2016 Grass Valley USA, LLC. All rights reserved. GV STRATUS 4.0 gvtp_20160218_00:31:01