Adding a transfer event

To schedule transfers, add an event in the Scheduled Transfer tool for each asset that needs to be transferred.

Do one of the following:
- Click the Add Event button.
- Right-click and select Add Event. ( A)
The Inspector panel loads event properties.
Fill in properties of your event according to the following:
1. Name — Enter a name for the transfer event that displays on the Scheduled Transfer tool.
2. Destination — Select a destination bin for the transfer from the drop-down list.
  Destination availability depends on the location configuration of Scheduled Transfer in your GV STRATUS Control Panel. If the bin has security access permissions configured, the recorded clip inherits those permissions.
3. File Name — Enter the name of the file to be transferred. If you want the file name to be the same as the asset name, select the Use Asset Name checkbox.
4. Auto Rename — Select the checkbox if you want the file name to be renamed automatically if the same name exists at the destination. Additional suffix will be automatically added to the file name if you selected the checkbox.
5. File Format — Select the format of the file to be transferred from the following:
  - GXF: General Exchange Format
  - MXF: Material Exchange Format
  - MOV: QuickTime Movie
  - MOV Reference: QuickTime Reference Movie
6. Start Time — Enter the date and time you want the transfer to start. The default date is the current date. You can also select your start date from the calendar when you click the drop-down arrow. Enter the time using the format hour:minutes:seconds.
  Note: Overlapping events are not supported.
7. End Time — Enter the date and time you want the transfer to end. You can also select your end date from the calendar when you click the drop-down arrow.
  
  Note: The event duration must be more than 1 minute to ensure frame accurate transfers in your operation.
8. Source Channel — Channel availability depends on the configuration in your system. You can only see and select channels that have been configured for the Scheduled Transfer tool. Make sure that the channel is not in Continuous Record mode.
  If configured as a Multicam channel in the GV STRATUS Control Panel, two or three input sources can be selected depending on your configuration. You can also schedule overlapping event transfers on two or three different input sources within the same Multicam channel.
By default, the Scheduled Transfer tool opens to the current day, date, and time according to your system time. The time of day format within the Scheduled Transfer is directly from the current time of day format of your machine.
To set the 24 hour format to your Scheduled Transfer, change the time format of your Windows client by selecting Start | Control Panel | Clock, Language and Region, and change the time format accordingly.
Note: Changes to the Scheduled Transfer’s time format can only be seen after a restart of the GV STRATUS application.
Click the Add button in the Inspector panel. The event is added to the Scheduled Transfer tool.
To add another transfer event, in the Inspector panel, fill in properties and other information as in the steps earlier in this procedure, then click the Add button.

To delete an event, refer to "Deleting an event" topic.