Other Topic Library Versions

Set resync priority

The priority of synchronization by RDR can be specified. By changing the priority, the I/O load during synchronization can be reduced using the following steps:

  1. Start the RDR Utility and right-click on RDR Virtual Disk x in the left pane then click Set Resync Priority.
  2. When a dialog box appears, select Low, Normal, or High (the default is Normal) and click OK.
  3. In the Set Resync Priority dialog box, click OK.
Parent topic: Dual disk configuration overview

Copyright © 2016 Grass Valley Canada. All rights reserved. GV STRATUS 4.5 gvtp_20160506_02:08:04