Sending the field EDIUS project to the home GV STRATUS system

The project must be saved in a location outside of the managed project location on the V: drive.

Select a sequence on the EDIUS timeline.
Press the F11 key. The Print to File dialog box opens.
On the Print to File dialog box, do the following substep:
1. Select the STRATUS Send for WAN Editing Exporter and then click Export. The Send Destination dialog box opens.
Enter the name of the sequence in the Send As box.
Asset and bin names must comply with K2 system specifications.
In the Destination List, select destinations as follows:
- Select one or more transfer destinations
- Select one or more conform destinations
You cannot select both transfer and conform destinations.
If configured for a Newsroom Computer System, you can also link the asset to a local or remote placeholder.
- If GV STRATUS security is enforced, your credentials must give you adequate permissions on bins, assets, and metadata.
- In order to link to a placeholder, you must be assigned with write permission for the Name property in Metadata section of GV STRATUS Control Panel.
1. On the Link To Placeholder tab, select a placeholder.
  If a remote placeholder, expand the remote site node.
  
  If already linked to a placeholder, you can select a different placeholder.
2. If desired, in the Placeholder Description field, enter text and click Save. The placeholder description is updated. It is not necessary to click Send to update the placeholder description.
Click Send. The transfer is initiated. Dialog boxes report progress. The EDIUS Workgroup application closes and opens the Startup dialog box.

The EDIUS Workgroup field-to-home site render process creates a GV STRATUS asset from the EDIUS Workgroup project.

You can check the progress of the transfer in the GV STRATUS Jobs Monitor.