Sending the field EDIUS project to the home GV STRATUS system with WAN Editing

  • The project must be saved in a location outside of the managed project location on the V: drive.
  1. Select a sequence on the EDIUS timeline.
  2. Press the F11 key. The Print to File dialog box opens.

  3. On the Print to File dialog box, do the following substep:
    1. Select the STRATUS Send for WAN Editing Exporter and then click Export. The Send Destination dialog box opens.



  4. Enter the name of the sequence in the Send As box.

    Asset and bin names must comply with K2 system specifications.

  5. In the Destination List, select destinations as follows:
    • Select one or more transfer destinations
    • Select one or more conform destinations

    You cannot select both transfer and conform destinations.

  6. If configured for a Newsroom Computer System, you can also link the asset to a local or remote placeholder.
    • If GV STRATUS security is enforced, your credentials must give you adequate permissions on bins, assets, and metadata.
    • In order to link to a placeholder, you must be assigned with the Rename Asset Rights role and write permission for the Name property in Metadata section of GV STRATUS Control Panel.
    1. On the Link To Placeholder tab, select a placeholder.

      If a remote placeholder, expand the remote site node.

      If already linked to a placeholder, you can select a different placeholder.

    2. If desired, in the Placeholder Description field, enter text and click Save. The placeholder description is updated. It is not necessary to click Send to update the placeholder description.
  7. Click Send.

    The WAN Editing Transfer dialog appears.

    You can drag the slider to set the quality of the transcoded file, and click on the drop-down list to set the speed of the transfer

    You can also select the Keep transferred segments check-box to re-use the transcoded file, if desired.

  8. Click OK.

    The WAN Editing dialog appears.

The EDIUS Workgroup field-to-home site render process creates and transfer GV STRATUS asset from the EDIUS Workgroup project.

You can also check the progress of the transfer in the GV STRATUS Jobs Monitor.


Copyright © 2020 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. GV STRATUS 6.10 gvtp_20200811_04:57:17